How many lights does your tree really need?
Measure once and get the number of strings to buy โ plus the wattage, so you find out tonight, not on the ladder, whether it will trip a breaker.
Christmas light calculator
Six measurements, six answers. Pick what you are lighting, type what you measured, and the number of strings appears below.
The lights you plan to buy
Sets the typical wattage and string length below. Both stay editable.
Printed on the box.
Lit length, not including the lead wire.
We fill in a typical figure. Use the one on your box if it differs.
Add the cost of running them
Replace this with the rate on your own bill โ it varies a lot by state.
Add up every gutter, eave and peak you want lit.
Covers corners, drops and the run back to the outlet.
The lights you plan to buy
Sets the typical wattage and string length below. Both stay editable.
Printed on the box.
Lit length, not including the lead wire.
We fill in a typical figure. Use the one on your box if it differs.
Add the cost of running them
Replace this with the rate on your own bill โ it varies a lot by state.
A tape measure round the trunk or post.
3 in is dense, 6 in is open.
The lights you plan to buy
Sets the typical wattage and string length below. Both stay editable.
Printed on the box.
Lit length, not including the lead wire.
We fill in a typical figure. Use the one on your box if it differs.
Add the cost of running them
Replace this with the rate on your own bill โ it varies a lot by state.
Only used for a spiral.
Only used for a spiral.
The lights you plan to buy
Sets the typical wattage and string length below. Both stay editable.
Printed on the box.
Lit length, not including the lead wire.
We fill in a typical figure. Use the one on your box if it differs.
Add the cost of running them
Replace this with the rate on your own bill โ it varies a lot by state.
The lights you plan to buy
Sets the typical wattage and string length below. Both stay editable.
Printed on the box.
Lit length, not including the lead wire.
We fill in a typical figure. Use the one on your box if it differs.
Add the cost of running them
Replace this with the rate on your own bill โ it varies a lot by state.
The lights you plan to buy
Sets the typical wattage and string length below. Both stay editable.
Printed on the box.
Lit length, not including the lead wire.
We fill in a typical figure. Use the one on your box if it differs.
Add the cost of running them
Replace this with the rate on your own bill โ it varies a lot by state.
Buy the right amount once, instead of going back for a third box.
Most people buy twice
You buy what looks like plenty, get three quarters of the way round the tree, and go back for more โ in a different shade of white. The arithmetic that avoids this takes about a minute, and it is the same arithmetic every time.
One method each
A tree is counted by height. A roofline is measured in linear feet. A column is a spiral, which is just geometry. Each tab asks only for what its own shape needs.
Wattage, not wishful thinking
Every result is checked against the continuous-load limit of a 15 or 20 amp circuit, and tells you when a display has to be split across two breakers.
It shows its working
Each answer states the sum it came from, so you can sanity-check it against your own eye instead of trusting a black box.
The questions behind the numbers
Short, specific answers to the things people actually search for the week they put the lights up.

How many Christmas lights per foot? The rule, and when to break it
The standard figure is 100 mini lights per vertical foot of tree. Here is where that number comes from, what it means for C7 and C9 bulbs, and the three cases where it gives the wrong answer.

How many lights for a 7-foot Christmas tree?
700 mini lights for a standard 7-foot tree, 350 for a slim one, up to 1,400 for a showpiece. The counts for every bulb size, how many boxes that is, and what it draws.

How many Christmas lights by tree height โ the full chart
Bulb counts for every tree from 4 to 12 feet, at three densities and in four bulb sizes, with the number of boxes and the wattage for each. One table, no scrolling through advice.

Warm white vs cool white Christmas lights โ which to choose
Warm white reads as traditional and candle-like, cool white as crisp and modern. The colour temperatures behind the labels, how each looks against brick, snow and greenery, and why mixing brands goes wrong.

LED vs incandescent Christmas lights โ the honest comparison
LEDs draw roughly a tenth of the current, which decides how much display you can run at all. Incandescents still win on colour and on price per box. The figures for both, and when each one is right.

How many Christmas lights can you connect together?
Three sets of incandescent lights, per the CPSC โ and for LEDs, whatever the box says, which is usually far more. The two limits that actually apply, and why the outlet is not the one that matters.
Three numbers worth knowing
- 1,440 watts A 15 amp circuit at 120 volts is rated 1,800 watts. Anything running three hours or more counts as a continuous load, so the working figure is 80% of that.
- Three sets The Consumer Product Safety Commission advises never stringing together more than three sets of incandescent lights, and no more than three standard-size sets per single extension cord. LED strings are far lighter on current and their own packaging states a higher limit.
- The tag on the box Every safety-tested string carries a label with its own maximum. Where it disagrees with any rule of thumb, including ours, the label wins.